Unmanned technologies globally
jDrones documentation wiki

User Tools

Site Tools


Digital Airspeed sensor

The Pixhawk digital differential airspeed sensor has a very low offset, a high resolution, and best of all does not suffer from the noise induced by long cables and offsets in the ratio-metric output on the APM 2.6 analog airspeed sensor.

Featuring a Measurement Specialties 4525DO sensor, with 1 psi measurement range (roughly up to 100 m/s or 360 km/h or 223 mp/h), the Pixhawk Airspeed Sensor Kit enables a resolution of 0.84 Pa, with data delivered at 14 bits from a 24 bit delta-sigma ADC. It also measures temperature to allow calculation of true airspeed from indicated airspeed using the MS5611 static pressure sensor on Pixhawk. Not influenced by the heat of nearby processing components, it is much closer to the true air temperature than the previous analog sensor setups. Supported on all Pixhawk and PX4 autopilot generation boards, this kit has M3 (3/32in) mounting holes. Kit dimensions 24x17x10mm, distance between holes 10x18mm.


  1. Digital airspeed sensor
  2. Rubber tubing
  3. Pitot tube
  4. Four-wire I2C cable
uav/asp4525plain.txt · Last modified: 2019/05/08 08:11 by metro