Using SLCAN board is rather straight forward.

Download UAVCAN GUI if you don't have it yet from https://uavcan.org/GUI_Tool/Overview/

1. Install UAVCAN GUI
2. Connect USB cable to your SLCAN board and computer
3. Open UAVCAN GUI, set correct COM port + baudrate

And you are set… Sounds easy right? It is.

Below you find more detailed descriptions of how to upload new firmware on your UC4H boards and how to configure them.

Bear in mind that you need to have bootloader installed on your UC4H boards before they are visible to SLCAN and UAVCAN GUI. All boards coming from jDrones has bootloader installed and they are ready to use.

Coming right up…