Unmanned technologies globally
jDrones documentation wiki

User Tools

Site Tools


can:gennode21-definition

This is an old revision of the document!


Gen.Node V2.1-jD

This is jDrones version of UC4H Generic Node. Documentation is accurate only if you are using original jDrones Gen.Node boards.


Board Definitions

TOP Side of the UC4H Gen.Node v2.1


Connector Definitions

Connector Description
EXT5 External 5V input if you need more power than what C5V line can provide
CAN1 UAVCAN main connector. Identical to CAN2 port, can be used for linking to another UAVCAN device or terminator
CAN2 UAVCAN main connector. Identical to CAN1 port, can be used for linking to another UAVCAN device or terminator

Firmwares

There are TWO main softwares for this board. One is Bootloader and another is operation Firmware. Please do not mix them. Firmwares you upload with SLCAN board over the UAVCAN databus. Bootloader is uploaded via SWD connector.

This board is coming with latest UC4H Bootloader firmware uploaded at jDrones. Normally you do not need to update bootloader unless: You want to upgrade or you have “bricked” your UC4H board.

You can download always latest firmwares and bootloaders from our document site. You need jDrones STM32 Programmer to burn bootloader in this board.

Firmwares/Bootloaders, please take a look at our firmware page

can/gennode21-definition.1542530636.txt.gz · Last modified: 2018/11/18 08:43 by admin