This is an old revision of the document!
Name | Type | Version | Description |
---|---|---|---|
uc4h-bootloader-v006-jd.bin | |||
BL | v006 | UC4H jDrones bootloader, loaded as default bootloader on all jDrones UC4h UAVCAN Node boards. If you brick your UC4H board. This is the file that you need to upload first to your Node board and then actual firmware. You need jD-STM32 programmer to upload this bootloder | |
uc4h-slcan-v009-jd.bin | |||
BL | v009 | SLCAN bootloader firmware. Can only be used with SLCAN board. |
|
uc4h-funthing-v007-4bl-jd.bin | |||
FW | v007 | Funthing software. Servos, Potentiometers etc are activated on this software. Use SLCAN/UAVCAN GUI to upload. Can be used with Gen.Node, jD-UCOLED |
|
uc4h-gpsmagbaro-v026-4bl-jd.bin | |||
FW | v026 | UC4H GPS, Compass, Barometer firmware | |
uc4h-notify-v009-4bl-jd.bin | |||
FW | v009 | UC4H OLED 0.96“ Notify firmware. Show your autopilot statusses on UAVCAN connected OLED board | |
uc4h-powerbrick-v007-4bl-jd.bin | |||
FW | v007 | UC4H Power Brick. Power module firmware. Supports voltage and current sensing. | |
Name | Type | Version | Description |
---|---|---|---|
STLink Programer | BL | v1.0 | jDrones STM32 Programmer bootloader file |