Unmanned technologies globally
jDrones documentation wiki

User Tools

Site Tools


can:firmwares

This is an old revision of the document!


UAVCAN Components

UC4H Boards

Name Type Version Description
uc4h-bootloader-v006-jd.bin
BL v006 UC4H jDrones bootloader, loaded as default bootloader on all jDrones UC4H UAVCAN Node boards. If you brick your UC4H board, then this is the file that you need to upload first to your Node board, and then the actual firmware. You need jD-STM32 programmer to upload this bootloader
uc4h-slcan-v009-jd.bin
BL v009 UC4H jDrones SLCAN firmware. You need jD-STM32 programmer to upload this firmware.

Can only be used with jDrones UC4H SLCAN board.
uc4h-funthing-v007-4bl-jd.bin
FW v007 Funthing software. Servos, Potentiometers etc are activated on this software. Use SLCAN/UAVCAN GUI to upload.

Can be used with Gen.Node, jD-UCOLED
uc4h-gpsmagbaro-v026-4bl-jd.bin
FW v026 UC4H GPS, Compass, Barometer firmware
uc4h-notify-v009-4bl-jd.bin
FW v009 UC4H OLED 0.96“ Notify firmware. Show your autopilot statusses on UAVCAN connected OLED board
uc4h-powerbrick-v007-4bl-jd.bin
FW v007 UC4H Power Brick. Power module firmware. Supports voltage and current sensing.

Additional Boards

Name Type Version Description
STLink Programer BL v1.0 jDrones STM32 Programmer bootloader file
can/firmwares.1542660733.txt.gz · Last modified: 2018/11/19 20:52 by olliw