User Tools
can:firmwares
This is an old revision of the document!
Table of Contents
UAVCAN Components
UC4H Boards
| Name | Type | Version | Description |
|---|---|---|---|
| jD-UC4H Bootloader | BL | v006 | UC4H jDrones bootloader, loaded as default bootloader on all jDrones UC4h UAVCAN Node boards. If you brick your UC4H board. This is the file that you need to upload first to your Node board and then actual firmware. You need jD-STM32 programmer to upload this bootloder |
| SLCAN v009 | BL | v009 | SLCAN bootloader firmware. |
| UC4H Funthing V007 | FW | v007 | Funthing software. Servos, Potentiometers etc are activated on this software. Use SLCAN/UAVCAN GUI to upload |
Additional Boards
| Name | Type | Version | Description |
|---|---|---|---|
| STLink Programer | BL | v1.0 | jDrones STM32 Programmer bootloader file |
can/firmwares.1542614057.txt.gz · Last modified: 2018/11/19 07:54 by admin
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial 4.0 International
